This exercise is best performed inside a squat rack for safety purposes. To begin, first set the bar on a rack just below shoulder level. Once the correct height is chosen and the bar is loaded, step under the bar and place the back of your shoulders (slightly below the neck) across it.
Hold on to the bar using both arms at each side and lift it off the rack by first pushing with your legs and at the same time straightening your torso.
Step away from the rack and step forward with your right leg and squat down through your hips, while keeping the torso upright and maintaining balance. Inhale as you go down. Note: Do not allow your knee to go forward beyond your toes as you come down, as this will put undue stress on the knee joint.
Using mainly the heel of your foot, push up and go back to the starting position as you exhale.
Repeat the movement for the recommended amount of repetitions and then perform with the left leg.
Caution:This is a movement that requires a great deal of balance so if you suffer from balance problems you may wish to either avoid it or just use your own bodyweight while holding on to a fixed object. Definitely never perform with a barbell on your back if you suffer from balance issues.
Variations:There are several ways to perform the exercise.
One way is to alternate each leg. For instance do one repetition with the right, then the left, then the right and so on.
The other way is to do what I call a static lunge where your starting position is with one of your feet already forward. In this case, you just go up and down from that starting position until you are done with the recommended amount of repetitions. Then you switch legs and do the same.
A more challenging version is the walking lunges where you walk across the room but in a lunging fashion. For walking lunges the leg being left back has to be brought forward after the lunging action has happened in order to continue moving ahead. This version is reserved for the most advanced athletes.
Using a leg press machine, sit down on the machine and place your legs on the platform directly in front of you at a medium (shoulder width) foot stance. (Note: For the purposes of this discussion we will use the medium stance described above which targets overall development; however you can choose any of the three stances described in the foot positioning section).
Lower the safety bars holding the weighted platform in place and press the platform all the way up until your legs are fully extended in front of you. Tip: Make sure that you do not lock your knees. Your torso and the legs should make a perfect 90-degree angle. This will be your starting position.
As you inhale, slowly lower the platform until your upper and lower legs make a 90-degree angle.
Pushing mainly with the ball of your foot and using the quadriceps go back to the starting position as you exhale.
Repeat for the recommended amount of repetitions and ensure to lock the safety pins properly once you are done. You do not want that platform falling on you fully loaded.
Caution:Always check to make sure that when you re-rack the weight the platform is securely locked.
Variations:All foot stance variations described in the foot stance section.
For this exercise you will need to use a leg extension machine. First choose your weight and sit on the machine with your legs under the pad (feet pointed forward) and the hands holding the side bars. This will be your starting position. Tip: You will need to adjust the pad so that it falls on top of your lower leg (just above your feet). Also, make sure that your legs form a 90-degree angle between the lower and upper leg. If the angle is less than 90-degrees then that means the knee is over the toes which in turn creates undue stress at the knee joint. If the machine is designed that way, either look for another machine or just make sure that when you start executing the exercise you stop going down once you hit the 90-degree angle.
Using your quadriceps, extend your legs to the maximum as you exhale. Ensure that the rest of the body remains stationary on the seat. Pause a second on the contracted position.
Slowly lower the weight back to the original position as you inhale, ensuring that you do not go past the 90-degree angle limit.
Repeat for the recommended amount of times.
Variations:As mentioned at in the foot positioning section, you can use various foot positions in order to maximize stimulation of certain thigh areas. Also, you can perform the movement unilaterally (one leg at a time).
This exercise is best performed inside a squat rack for safety purposes. To begin, first set the bar on a rack just above shoulder level. Once the correct height is chosen and the bar is loaded, step under the bar and place the back of your shoulders (slightly below the neck) across it.
Hold on to the bar using both arms at each side and lift it off the rack by first pushing with your legs and at the same time straightening your torso.
Step away from the rack and position your legs using a shoulder-width medium stance with the toes slightly pointed out. Keep your head up at all times and maintain a straight back. This will be your starting position.
Begin to slowly lower the bar by bending the knees and sitting back with your hips as you maintain a straight posture with the head up. Continue down until your hamstrings are on your calves. Inhale as you perform this portion of the movement.
Begin to raise the bar as you exhale by pushing the floor with the heel or middle of your foot as you straighten the legs and extend the hips to go back to the starting position.
Repeat for the recommended amount of repetitions.
This type of squat allows a greater range of motion, and allows the trunk to maintain a more vertical position than other types of squats, due to foot position and the higher bar position.
